About Product

  • How can I adjust steering sensitivity?

    You can adjust the tightness of the nut at the front of the truck by using a T wrench. Loosen the nut to make the steering flexible. Tightening the nut will make the steering stiff.

  • How do I pair the remote to the AT2

    1.Turn off the remote and the board. 2. Long-Press the switch of the board and the switch of the remote at the same time for about 5 seconds until the remote begin to vibrate and the screen shows it’s connected. 3. Select KMH or MPH as you like. Short-click on the switch key to select,  double-...

  • How do I pair the remote to the board?

    It’s easy! 1: Turn off the board and remote. 2: Long press the power button of the board and the remote at the same time for more than 5 seconds. 3: When the remote vibrates, it will show that it's paired.

  • How do I pair the remote to the wowgo knight?

    1.Turn off the remote and the board. 2. Long-Press the switch of the board and the switch of the remote at the same time for about 5 seconds until the remote begin to vibrate and the screen shows it’s connected. 3.Select KMH or MPH as you like. Push the control wheel on the remote to select, sh...

  • How much weight can a WowGo board carry?

    The max load of WowGo is 330 pounds (150kg). We do recommend a maximum weight of 264 pounds (120kg). Weights above that might have an impact on the board's performance and speed.

  • Why doesn't one of my motors work

    Step 1: Remove the ESC enclosure. Step 2: Disconnect all the cables. Step 3: Swap the connection of the two motors. Step 4: Turn on the board and scroll the wheel of the remote. Here are 2 results: ❶ If the same motor does not work, that means the motor is broken. ❷ Instead, if the ori...

  • Why is there noise coming from my wowgo 3？

    Step 1： Holding the board in hand, without contacting with the ground or wall. Then turn on the board and scroll the wheel of the remote.                If there is still noise, please refer to the problem of "Why doesn't one of my motors work", and change the ESC cable and the motor cable.      ...

  • Why is there noise coming from my wowgo 3X？

    Step 1: Remove the belts.  Then turn on the board and scroll the wheel of the remote. Step 2: If there is still noise, please check if the small screw of the motor gear is loose. (Screw size: 1.5mm) Step 3: If the screws are not loose, please test the motors. Step 4: Swap the connection ...

  • Why one of my board’s wheels would spin a little late than another wheel？

    Please don't worry about this. It's normal. When the board is idling, there is no weight on it so the two motors are not running synchronously. But when you ride your board, there is the weight on it. And the two motors will run synchronously.

  • Why there is weird sound from the board when I turn it on?

    This is normal, when you turn on the board, the battery needs to output a large amount of current, and the ESC needs to input a large amount of current, so it will cause this noise.